Dental Vacuum Forming Machine, 1000W Power Former Heat Molding Tool with Power Cord 110V Laboratory Dental Vacuum Forming Molding Heat Molding Tool Lab Forming Equipment

Description This forming machine is indispensable professional equipment in dental clinics and laboratories. The premium materials and exquisite craftsmanship give it excellent durability. High power and symmetrical heating elements can achieve uniform and rapid heating, ensuring precise molding effects. Its compact structure does not take up too much space wherever it is placed, and we believe it is a good helper for your work.Instructions for Use and Operation1. Turn on the power and check whether the operating levers/buttons of the molding machine are normal.2. Turn the upper cover(right or left) by 90°, place the required diaphragm(not included) between the upper and lower frames, and pull down the ball puller to clamp it.3. Reset the top cover and twist the lifting handle to raise the set frame to the working height(limit lever on the upper part of the spindle).4. Place the packaged product(not included) in the center on the mesh board.5. Switch on the heating switch and heat the diaphragm(not included), when the diaphragm is heated to 0.39in below the plane of the lower frame(about two or three minutes).6. Turn off the heating switch, twist the lifting handle, lower the set frame, turn on the vacuum motor at the same time, and then remove it when the package is shaped.SpecificationColor: Blue Material: Aluminum, Stainless SteelProcess: PaintingPlug Type: US StandardVoltage: 110V, 60Hz ±10%Power: 1000W Heating Power: 600WMolding Power: 800WPower Cord Length: 1.2-1.5m/3.94-4.92ftMolding Size: 110*110mm/4.33*4.33inProduct Size: 25*21*30cm/9.84*8.27*11.81inPackage Size: 30*25*21cm/11.81*9.84*8.27inGross Weight: 6kg/13.28 lbsNet Weight: 6kg/13.28 lbsPackage Included1* Forming MachineNotes1.Please note that this product does not include diaphragms.2.Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater.3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

• 【Durable】This vacuum forming machine is constructed of high-quality aluminum and stainless steel, finished with a paint finish that resists scratches, rust, and wear. It's durable and sturdy, ensuring a long service life. Its simple structure and smooth surface make it easy to clean and maintain, ensuring the machine remains in excellent working condition.
• 【Precision Molding】During the molding process of this injection molding machine, the material fits tightly into the mold, and the symmetrical heating elements ensure even heat distribution, achieving stable and precise molding results.
• 【Efficient】This vacuum casting machine features a high-performance heating element with 600w of heating power for rapid heating. The powerful motor provides strong downward suction for rapid cooling of the formed thermoplastic material, improving production efficiency and reducing waiting time. The ergonomically designed control handle is easy to grip, making it easy to lift and lower the clamping plate.
• 【Thin Design】This frame machine main shaft is equipped with a limit lever to securely clamp the thermoplastic sheet. A separate thermoforming switch is easy to operate and prevents accidental operation. The raised knob on the top lid allows for safe opening to prevent burns from high temperatures. Its compact size (9.84 x 8.27 x 11.81 inches) doesn't take up much space, making it ideal for smaller dental offices or labs.
• 【Wide Applications】This plastic injection molding machine is suitable for a wide range of materials and clinical applications. Compatible with nearly all dental thermoplastics, it is an essential tool for any dental practice. It can be used for molding and producing discolored braces, orthodontic retainers, arch splints and veneers, fluoride trays, temporary or permanent abutments, and mouthguards.