Yctze 17 Pcs M12x1.5 Thread Inserts Kit, Female Thread Repairing Accessory, X 1.5 Helicoil, Assortment Set for Thread Repair

1. The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear and .2. In case of threading error or repair of a damaged internal threaded hole, the threaded hole can be economically and effectively repaired by using a threaded sleeve as a means of repair. The same screws can also be used after repair.3. Applicable to high voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc. Threaded hole slip repair of parts, such as threaded hole repair of injection machine template. The imported equipment or mechanical inch thread is damaged, and it needs to be changed to mm thread due to the supply of spare parts.4. The use of wire screw sleeves for mm---inch threaded hole conversion is convenient and fast.5. With a box and sponge for well and transportation.Specification:Item Type:Thread SleeveMaterial:Stainless SteelThread Insert Size:M12x1.5 Length:2DPackageList:1 x Spiral Drill1 x Screw Tap1 x Wrench1 x Break Pin Tool1 x Hex Wrench12 x Thread Repair InsertNotice:InstructionsDrill holes using a matching drill bit.Use wire threaded (special) tap tapping, the tapping depth must exceed the wire screw sleeve mounting length.Insert the wire screw into the mounting wrench with the tail down. Turn the wrench handle to screw the wire screw into the threaded hole.Use a break pin tool to align the mounting handle (tail) with a hammer to strike the punching tool and the tail handle can be removed.When there is a problem with the installation of the threaded screw sleeve, (such as a jumper), the threaded sleeve can be taken out by the wire threading tool.

• Applicable to high voltage switchgear, microwave communication, auto parts, air separation equipment, radiators, etc. Threaded hole slip repair of parts, such as threaded hole repair of injection machine template. The imported equipment or mechan
• The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear and
• FAST THREAD HOLE CONVERSION FOR MM---INCH: The use of wire screw sleeves for mm---inch threaded hole conversion is convenient and fast.
• The wire screw set is placed in the screw hole of the workpiece such as aluminum alloy to form a standard internal thread with high strength, wear and
• Easy Maintenance: The damaged screw hole is installed into the wire screw sleeve, and it can be used after repairing to avoid the possibility of damage to the workpiece. The thread insert is placed in the screw hole of a workpiece such as an aluminum alloy to form a high-strength, wear-resistant, high-precision standard internal thread.